 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
6' HEAVY DUTY SAS CRUSHING FORKS™ designed with "The Claw"
The Claw folds up out of the way so you can use the forks to lift and move materials.
"The visibility with the SAS CLAW ENGINE PULLER is great!"
●Increase your revenue from your scrap cars 10 to 30%
●High visibility to allow you maximum control and speed up operations!
●Multi-purpose forks, handle cars, pull engines, and load car crushers
●Engineered for up-time: Tough design can withstand continuous breakout force prying of engines and transmissions from cars.
●Built for easy in field service for long life. (See features)
FUNCTION:
FEATURES:
CUSTOMER TESTIMONIALS:
Pry and Pull
Engines/Transmissions out.
Crush Cars
Click here to watch a
movie of this SAS CLAW ENGINE PULLER. If The Claw
is used in a vehicle scrapping facility these recommendations should be
followed:
42090
●Click here to
watch a movie of this SAS CLAW ENGINE PULLER.
●Pry out engines and transmissions from scrap cars and trucks with the forks, lift them out with the claw.
●Nearly any make or model of 3 to 4 yard wheel loaders with auxiliary hydraulic spool can be fitted with SAS FORKS™ with the Claw. Direct mounting with pin attachment or it can be fit with a quick coupler system.
●The clamping power of The Claw is so great, that you can actually clamp the engine/transmission assembly and lift the entire vehicle off the ground.
●4,000 PSI hydraulic components for maximum durability
●Extended back height for handling stacks of cars for load tip protection
●Solid steel forged blades for high strength
●Replaceable blades, in 3 hours
●Replaceable cast iron claw tips, in minutes
●Replaceable skid plates under carriage for extended useful life
●"We almost paid for our entire investment in the first semi trailer load of engines."
●"The SAS Claw Puller on my Volvo L90E has pulled 7,000 to 8,000 engines without failure... Definitely
interested in more products from SAS" Chris at Wrench & Go, IA
●"I love the way the Claw works! It works great! I am very satisfied with this product. I paid for
this unit in about 2 weeks wit the extra cash I earned from pulling
engines and transmissions for scrap." Gary, Colorado Auto Parts, CO
·All fluids from the vehicles must be properly drained and
disposed of PRIOR to using the Claw to pull out engines or transmissions.
·Simply
use one fork blade to pry the engine, breaking the mounts, or optionally disconnect
or cutting of axle shafts and motor mounts to aid in the quick and easy
removal of the engine & transmission with The Claw.
·Pulling of engines or transmissions out of vehicles, should only be done
on a paved surface with proper containment measures.
·Engine, transmissions and other components will be damaged
by the use
of the Claw.
·This should only be used on scrap vehicles where no good parts will be
saved.
030807
This
web site and it's contents are property of S.A.S. of Luxemburg, Ltd. © 1999-2008 S.A.S. of Luxemburg, Ltd. USA
Phone: 1-920-845-2198  |
|
Notice:
This web site, the pictures, content, designs, forks, and likeness of such are
property of S.A.S. of Luxemburg, Ltd. and are protected under all applicable
Copyright, Trade Mark, Trade Dress, and any Pending Patent. SAS™, SAS FORK™ , SAS FORKS™
, SAS Quick Coupler Systems™, and Fastest Forks In The World ® are trade marks of S.A.S. of Luxemburg, Ltd.
No information, pictures, designs, or forks may be duplicated in part, entirety, or in likeness. |
